Performance characteristics:

The machine adopts 3-roller symmetrical structure with the upper roller moving vertically the center between the two lower rollers , which is achieved through the drive of the screw , the nut ,the worm and the lead screw , The two lower roller rotates ,and provides the plate materials with troque through the engagement of the output gear of the moderator with the gear of the lower rollers , the disadvantage of the machine is that the ends of the plate materials need to have the help from other equipment for pre-bending .
 

 Technical parameters:

 

規格型号 Specification	最大卷闆厚度 Max thickness of coiled plate mm	最大卷闆寬度 Max width coiled plate mm	闆材屈服極限 Yieldinglimit of sheet metal Mpa	卷闆速度 Rolling speed m/min	最小卷闆直徑 The minimum bending diameter mm	上軸直徑 Dlametr of top shaft mm	下軸直徑 Dlametr of bottom shaft mm	兩下軸中心距 Two shaft center distance mm	主電機功率 Motor power kw
W11-4x1500	4	1500	245	5	300	150	140	185	3
W11-6x1500	6	1500	245	5	380	160	140	220	4
W11-6x2000	6	2000	245	4.5	380	170	160	260	5.5
W11-6x3200	6	3200	245	4.5	380	220	180	280	7.5
W11-8x2000	8	2000	245	4.5	400	185	170	260	5.5
W11-8x2500	8	2500	245	4.5	550	240	180	280	7.5
W11-12x2000	12	2000	245	4.5	550	240	180	280	7.5
W11-12x2500	12	2500	245	4.5	600	260	220	320	11
W11-12x3000	12	3000	245	4	700	280	240	360	11
W11-16x2000	16	2000	245	4	600	260	220	320	7.5
W11-16x2500	16	2500	245	4	700	280	240	360	11
W11-16x3000	16	3000	245	4	850	340	260	430	15
W11-20x2000	20	2000	245	4	700	280	240	360	11
W11-20x2500	20	2500	245	4	850	340	260	430	15
W11-25x2000	25	2000	245	4	850	330	270	430	15
W11-25x2500	25	2500	245	4	900	370	270	480	22
W11-30x2500	30	2500	245	4	1200	420	360	550	30
W11-30x3000	30	3000	245	4	1200	450	390	600	37

Description and specifications given in this catalogue are subject to modification without notice.